二维胶体玻璃中玻色峰与结构无序度的关联

本文从实验上研究了胶体玻璃在相同面密度下随着体系结构无序程度的增加, 振动态密度和玻色峰的变化规律. 通过调制两种不同粒径的温敏性水凝胶的数量比来改变体系的无序程度. 通过分析无序体系的声子模式得到体系的振动特性. 研究发现, 随着无序度的增加, 态密度在低频区域增强、玻色峰增高、玻色峰的峰值向低频区域移动. 不同无序程度的样品引起玻色峰的低频声子模式都表现出准局域的特点, 且低频准局域声子模式与样品中无序结构存在关联.     

In-situ SiN combined with etch-stop barrier structure for high-frequency AlGaN/GaN HEMT

The etch-stop structure including the in-situ SiN and AlGaN/GaN barrier is proposed for high frequency applications.The etch-stop process is realized by placing an in-situ SiN layer on the top of the thin AlGaN barrier.F-based etching can be self-terminated after removing SiN,leaving the AlGaN barrier in the gate region.With this in-situ SiN and thin barrier etch-stop structure,the short channel effect can be suppressed,meanwhile achieving highly precisely controlled and low damage etching process.The device shows a maximum drain current of 1022 mA/mm,a peak transconductance of 459 mS/mm,and a maximum oscillation frequency(fmax)of 248 GHz.     

A systematic study for the structures and properties of phosphorylated pulp fibers prepared under various conditions

Cellulose - A bleached softwood kraft pulp was phosphorylated with (NH4)2HPO4 and urea at 150 ℃ for 0‒40 min, and the structures and properties of the resulting...     

Visible light-driven acridone catalysis for atom transfer radical polymerization

Acridone as a new kind of visible light photocatalyst has been developed to catalyze metal free atom transfer radical polymerization (ATRP). The photocatalyst possess low excited state potential as can undergo an oxidative quenching pathway to initiate ATRP of vinyl monomers. Kinetic study and light on/off reaction demonstrate the “living”/controlled nature of the polymerization by light. Block copolymers can be achieved by using PMMA as macroinitiator to reinitiate polymerization of other vinyl monomers, which shows highly preserved Br chain-end functionality in the synthesized polymers. Moreover, the polymerization can be conducted under air atmosphere as most photocatalysts need anaerobic condition, which may give inspiration of further application of this kind of photocatalyst.     

Facile fabrication of oxygen-doped carbon nitride with enhanced visible-light photocatalytic degradation of methyl mercaptan

Research on Chemical Intermediates - Element doping has demonstrated an effective strategy for enhancing photocatalytic performance of carbon nitride (CN). Herein, we reported that oxygen-doped CN...     

SYNTHESIS,CRYSTAL STRUCTURES AND BIOLOGICAL ACTIVITY OF TRINUCLEAR NICKEL(II) AND COPPER(II) COMPLEXES DERIVED FROM N,N′-BIS(4-BROMOSALICYLIDENE)- 1,3-PENTANEDIAMINE

Journal of Structural Chemistry - The self-assembly reaction of the bis-Schiff base N,N′-bis(4-Bromosalicylidene)-1,3-pentanediamine (H2L) with nickel chloride and sodium azide in methanol...     

Efficient Gating of Ion Transport in Three‐Dimensional Metal–Organic Framework Sub‐Nanochannels with Confined Light‐Responsive Azobenzene Molecules

1D nanochannels modified with responsive molecules are fabricated to replicate gating functionalities of biological ion channels, but gating effects are usually weak because small molecular gates cannot efficiently block the large channels in the closed states. Now, 3D metal–organic framework (MOF) sub‐nanochannels (SNCs) confined with azobenzene (AZO) molecules achieve efficient light‐gating functionalities. The 3D MOFSNCs consisting of a MOF UiO66 with ca. 9–12 Å cavities connected by ca. 6 Å triangular windows work as angstrom‐scale ion channels, while confined AZO within the MOF cavities function as light‐driven molecular gates to efficiently regulate the ion flux. The AZO‐MOFSNCs show good cyclic gating performance and high on–off ratios up to 17.8, an order of magnitude higher than ratios observed in conventional 1D AZO‐modified nanochannels (1.3–1.5). This work provides a strategy to develop highly efficient switchable ion channels based on 3D porous MOFs and small responsive molecules.     

Co‐syndiospecific Alternating Copolymerization of Functionalized Propylenes and Styrene by Rare‐Earth Catalysts

The precise control of monomer sequence and stereochemistry in copolymerization is of much interest and importance for the synthesis of functional polymers, but studies toward this goal have met with only limited success to date. Now, the co‐syndiospecific alternating copolymerization of methoxyphenyl‐ and N,N‐dimethylaminophenyl‐functionalized propylenes with styrene by half‐sandwich rare‐earth catalysts is reported. This reaction efficiently afforded the corresponding functionalized propylene‐alt‐styrene copolymers with a perfect alternating sequence and excellent co‐syndiotacticity (rrrr >99 %), thus constituting the first example of co‐stereospecific alternating copolymerization of polar and non‐polar olefins.     

Single top partner production in the tZ channel at eγ collision in the littlest Higgs model with T-parity

Introducing the top partner is a common way to cancel the largest quadratically divergent contribution to the Higgs mass induced by the top quark. In this work, we study single top partner production in the tZ channel at eγ collision in the littlest Higgs model with T-parity(LHT). Since it is well known that polarized beams can enhance the cross section, we analyze the signal via polarized electron beams,and photon beams. we have selected two decay modes for comparison, based on the leptonic or the hadronic decays of the W and Z from the top partner. We then construct a detailed detector simulation, and choose a set of cuts to enhance signal significance. For mode A(B), the capacity for exclusion in this process at s~(1/2)=3TeV is comparable to the current experimental limits with L=1000(500) fb~(-1). If the integrated luminosity can be increased to 3000 fb~(-1), the top partner mass+mTcan be excluded up to 1350(1440) GeV at 2σ level. We also considered the initial state radiation effect, and find that this effect reduces the excluding ability of the eγ collision on the the top partner mass by approximately 10 GeV. Moreover, the ability to exclude the LHT parameter space at eγ collision complements the existing research.     

真空条件下LiCl溶液蒸发量随浓度变化规律研究

除湿溶液再生是除湿空调系统的核心过程,为了提高除湿溶液再生效率,以蒸发量作为评价标准,在不同的真空度下对不同浓度LiCl溶液进行再生。对不同再生条件下,溶液的再生情况进行数学模拟及实验研究,并将模拟结果与实验结果进行对比分析,结果表明,实验结果同模拟结果具有相同的变化趋势。在6 kPa和8 kPa的压强下,LiCl溶液的蒸发量随浓度的增大先上升后下降,而在1 kPa的压强下,LiCl溶液的蒸发量随浓度的增大呈现出先下降再升高接着又下降的趋势。